NOTE: SLOT2 supports only PCIe Gen3 Solid-state drive and Intel Optane.
The following image indicates the location of the M.2 2230 solid-state drive and provides a visual representation of the
installation procedure.
Figure 7. M.2 2230 solid-state drive without bracket
Figure 8. M.2 2230 solid-state drive with bracket
Steps
1. Installing M.2 2230 solid-state drive without bracket:
a. Align the notch on the solid-state drive with the tab on the solid-state drive slot.
b. Slide the M.2 2230 solid-state drive at an angle into its slot on the system board.
c. Replace the (M2x4) screw to secure the M.2 2230 solid-state drive to the system board.
2. Installing M.2 2230 solid-state drive with bracket:
a. Align the notch on the solid-state drive with the tab on the solid-state drive slot.
b. Slide the M.2 2230 solid-state drive at an angle into its slot on the system board.
c. Replace the (M2x4) screw to secure the solid-state drive to the system board.
34
Removing and installing components
To Next Page
Loading...
