Removing the Coin-Cell Battery
1. Follow the procedures in Before Working Inside your computer.
2. Remove:
a. battery
b. base cover
3. Disconnect the coin-cell battery cable, pry the coin-cell battery upward, and remove the coin-cell
from the computer.
Installing the Coin-Cell Battery
1. Place the coin-cell battery in its slot.
2. Connect the coin-cell battery cable to the system board.
3. Install:
a. base cover
b. battery
4. Follow the procedures in After Working Inside Your Computer.
Removing the Power Connector
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove:
a. battery
b. base-corner cover (right)
c. base cover
25
To Next Page
Loading...
