Dell PS Series User Manual

Installation and Setup Installing a PS4000 Array
2–10
Ethernet 0 and Ethernet 1 to different network switches connected with
interswitch links.
For example, if you connect cables as shown in Figure 2-5, and Ethernet 0 fails,
initiators can be redirected to Ethernet 1.
Figure 2-5: Recommended Single Control Module Configuration
For a dual control module array, at a minimum, connect network cables to
Ethernet 0 on both control modules and then connect the cables to a network
switch. See Figure 2-6.

Dell PS Series Specifications

General

Category	Storage
Type	SAN (Storage Area Network)
RAID Support	RAID 5, RAID 6, RAID 10
Connectivity	iSCSI
Management	Dell Storage Manager
Data Protection	Snapshots, replication
Operating System Compatibility	Windows, Linux, VMware, Hyper-V
Capacity	Varies by model (e.g., 4TB to 1PB)
Product Type	Enterprise Storage Array