Dell S320 - Page 66

66 Using Your Projector
a Go to Menu Settings, press and then select Password to Enabled
the password settings.
b
Enabling the Password function will pop up a change screen. Key in a
4-digit number from the screen and press .
c To confirm, enter the password again.
d If the password verification is successful, you may resume with accessing
the projector's functions and its utilities.
2 If you have entered an incorrect password, you will be given another two
chances. After three invalid attempts, the projector will automatically turn
off.
NOTE: If you forget your password, contact DELL™ or a qualified
service personnel.
3
To disable the password function, select the Disabled option to close the
function.
4 To delete the password, select the Delete option.
S320 Password screen
S320wi Password screen