Figure 89. Load License Page
3. Select the license file, then click Load License. The Startup Wizard displays a message when the
license is successfully loaded.
• If the license loads successfully, the message The license submission has completed
successfully is displayed.
• If the license does not load successfully, the message Error: The license file is not valid message
is displayed.
4. Click Continue. The Create Disk Folder page opens.
Related links
Troubleshooting Storage Center Licenses
Create Disk Folder Page
Use the Create Disk Folder page to assign disks to a folder in order to create a single pool of storage for
volumes.
1. Select the disks to include in the disk folder. The Startup Wizard selects all available disks by default.
NOTE: A Secure Data folder can only contain self-encrypting FIPS drives, which are grayed out
until the key management server is configured.
110
Set up Storage Center Software
To Next Page
Loading...
