Figure 107. User Setup Page
4. Click Continue. The Configure IO Cards page opens.
Configure IO Cards Page
Use the Configure IO Cards page to configure network settings for iSCSI ports.
1. Enter the IP address for each iSCSI port in the IP Address field.
Figure 108. Configure IO Cards Page
Uninitialized iSCSI I/O ports have an IP Address of 0.0.0.0.
2. Enter the subnet mask for each iSCSI port in the Subnet Mask field.
3. Enter the gateway address for each iSCSI port in the Gateway field.
124
Set up Storage Center Software
To Next Page
Loading...
