Figure 91. Disk Folder Hot Spares
a. (Optional) Change the selection by selecting or clearing the disks to use as hot spares.
b. Click Continue, and if prompted, click OK to confirm. The Startup Wizard displays a summary of
the disk folder.
3. (Optional) Modify the default folder name and enter a description in the Notes field.
Figure 92. Disk Folder Attributes
4. (Optional) Click Advanced to configure advanced disk folder options. The wizard displays options for
redundancy and datapage size.
NOTE: The default managed disk folder settings are appropriate for most sites. If you are
considering changing the default settings, contact Dell Technical Support for advice.
112
Set up Storage Center Software
To Next Page
Loading...
