f. Click Continue. The dialog box displays a summary.
g. Click Create Now.
h. Repeat the previous steps to create additional fault domains as needed.
i. When you are finished creating fault domains, click Return. The iSCSI tab opens.
3. To use the embedded iSCSI port for iSCSI replication, configure the port numbered Slot 3/Port 2 on
each storage controller.
a. Set the Purpose field to Front End.
b. Set the Fault Domain field to the appropriate fault domain that you created.
c. (Optional) Type a descriptive name in the User Alias field.
Figure 118. Configure the iSCSI Port
4. To use the embedded MGMT and iSCSI ports for iSCSI replication or front-end connectivity,
configure the ports numbered Slot 3/Port 1 and Slot 3/Port 2 on each
storage controller.
a. Set the Purpose field to Front End.
b. Set the Fault Domain field to the appropriate fault domain that you created.
c. (Optional) Type a descriptive name in the User Alias field.
132
Set up Storage Center Software
To Next Page
Loading...
