Dell SC4020 - Page 40

4. Insert a screw into the rack mounting screw hole at the front of the rack and tighten the screw to
secure the rail to the rack.
Figure 31. Insert the Screw into the Rack Mounting Screw Hole
5. Extend the rail to fit the rack and insert the two rail pins into the pin holes at the marked location at
the back of the rack.
Figure 32. Extend the Rail
6. Insert a screw into the rack mounting screw hole at the back of the rack and tighten the screw to
secure the rail to the rack.
7. Repeat the previous steps for the second rail.
8. Slide the storage system chassis onto the rails.
40
Install the Storage Center Hardware