Dell XC Core XC760 User Manual

Table 4. Rear view of the system(continued)
Item Ports, panels, or slots Icon Description
NOTE: To reset the iDRAC (if not disabled on the iDRAC setup
page by pressing F2 during system boot), press and hold the
System ID button for more than 15 seconds.
12 OCP NIC card (optional) N/A The OCP NIC card supports OCP 3.0. The NIC ports are integrated
on the OCP card which is connected to the system board.
13 NIC ports (optional) The NIC ports that are integrated on the LOM card provide network
connectivity which is connected to the system board.
14 Power supply unit (PSU1) PSU1 is the primary PSU of the system.
Figure 6. Rear view of the system with 2 x 2.5-inch rear drive module
Table 5. Rear view of the system with 2 x 2.5-inch rear drive module
Item Ports, panels, or slots Icon Description
1 PCIe expansion card riser 1
(slot 1 and slot 2)
N/A The expansion card riser enables you to connect PCI Express
expansion cards. For more information , see the Expansion card
installation guidelines section.
2 BOSS module N/A BOSS module for internal system boot.
3 PCIe expansion card riser 2
(slot 3 and slot 6)
N/A The expansion card riser enables you to connect PCI Express
expansion cards.
4 Rear drive module N/A Enables you to install rear drives that are supported on your system.
NOTE: For drive slot numbers, see the Rear drive module
section.
5 VGA port Enables you to connect a display device to the system.
6 PCIe expansion card riser 4
(slot 7 and slot 8)
N/A The expansion card riser enables you to connect PCI Express
expansion cards. For more information , see the Expansion card
installation guidelines section.
7 Power supply unit (PSU2) PSU2 is the secondary PSU of the system.
8 USB 2.0 port The USB port is 4-pin, 2.0-compliant. This port enables you to
connect USB devices to the system.
9 USB 3.0 port The USB port is 9-pin and 3.0-compliant. This port enables you to
connect USB devices to the system.
10 Dedicated iDRAC9 Ethernet
port
Enables you to remotely access iDRAC. For more information,
see the Integrated Dell Remote Access Controller User's Guide at
www.dell.com/poweredgemanuals.
11 System Identification (ID)
button
The System Identification (ID) button is available on the front and
back of the system. Press the button to identify a system in a rack
12 Dell XC Core XC760 overview

Dell XC Core XC760 Specifications

General

Brand	Dell
Model	XC Core XC760
Category	Server
Language	English