Dell XC Core XC760 User Manual

Figure 169. Installing the intrusion switch module
Optional OCP card
Removing the OCP card
Prerequisites
1. Follow the safety guidelines listed in the Safety instructions.
2. Follow the procedure listed in the Before working inside your system.
3. Remove the expansion card riser.
Steps
1. Open the blue latch to disengage the OCP card.
2. Push the OCP card towards the rear end of the system to disconnect from the connector on the system board.
3. Slide the OCP card out of the slot on the system.
Installing and removing system components
171

Dell XC Core XC760 Specifications

General

Brand	Dell
Model	XC Core XC760
Category	Server
Language	English