Need help?Do you have a question about the Dell PowerEdge XR4510c and is the answer not in the manual?
Description and illustration of the server's front panel components and ports.
Description and illustration of the server's rear panel components and ports.
Detailed view of internal components within the server sled.
Explanation of network interface card LED indicators for status and activity.
Instructions on how to find the system's unique identification numbers.
Information about the system information label and its contents.
Physical dimensions of the server sled.
Maximum weight specifications for different system configurations.
Details on supported processors and their specifications.
Information about the system's cooling fans.
List of operating systems compatible with the system.
Specifications for the system's coin cell battery.
Details on memory types, capacities, and speeds supported.
Information on the supported storage controllers.
Specifications for supported M.2 SSD drives.
Overview of system ports and connectors.
Details on the types and number of USB ports.
Specifications for the Network Interface Controller (NIC) ports.
Information on the serial debug port.
Details on the Mini-DisplayPort.
Specifications for the iDRAC9 dedicated management port.
Details on the integrated graphics controller and video buffer.
Information regarding environmental certifications and requirements.
Standards met for thermal, shock, and vibration parameters.
Matrix detailing thermal limitations for various configurations and environments.
Step-by-step instructions for unpacking and powering on the system.
Information on configuring the Integrated Dell Remote Access Controller (iDRAC).
Methods for configuring the iDRAC IP address.
Procedures for accessing the iDRAC Web User Interface.
Methods for downloading system drivers and firmware.
Methods for downloading and installing operating system drivers.
Step-by-step guide for downloading drivers and firmware from Dell.
Configuring BIOS, iDRAC, and device settings via System Setup.
Information on the embedded systems management capabilities.
Overview of advanced embedded system management features.
Options for selecting boot devices and diagnostic utilities.
Using Preboot Execution Environment for network booting.
Critical safety precautions for working with system components.
Prerequisites and steps to perform before accessing internal components.
Steps to follow after completing internal component maintenance.
List of tools required for component installation and removal.
Guidelines and procedures related to the server sled.
Recommendations for installing sleds or sled blanks.
Procedure for safely removing the server sled from the chassis.
Procedure for safely installing the server sled into the chassis.
Procedures for removing and installing the server sled cover.
Steps to remove the server sled's top cover.
Steps to install the server sled's top cover.
Procedures for removing and installing cooling fans.
Steps to safely remove a cooling fan module.
Steps to safely install a cooling fan module.
Guidelines and procedures for managing system memory modules.
General recommendations for system memory installation.
Specific guidelines for optimal memory performance and compatibility.
Step-by-step instructions for removing a memory module.
Step-by-step instructions for installing a memory module.
Procedures for installing and removing the BOSS-N1 card.
Steps to safely remove the BOSS-N1 card.
Steps to safely install the BOSS-N1 card.
Procedures for installing and removing M.2 SSD modules.
Steps to safely remove an M.2 SSD module.
Steps to safely install an M.2 SSD module.
Procedures for installing and removing the M.2 riser module.
Steps to safely remove the M.2 riser module.
Steps to safely install the M.2 riser module.
Procedure to remove an M.2 SSD from its riser.
Procedure to install an M.2 SSD onto its riser.
Procedures for installing and removing the Network I/O board.
Steps to safely remove the Network I/O board.
Steps to safely install the Network I/O board.
Procedures for replacing the system battery.
Step-by-step guide for replacing the system battery.
Procedures for removing and installing the system board.
Steps to safely remove the system board.
Steps to safely install the system board.
Procedures for upgrading and managing the Trusted Platform Module (TPM).
Information on upgrading the TPM module.
Steps to safely remove the TPM module.
Steps to safely install the TPM module.
Steps to initialize the TPM for user access.
Steps to initialize the TPM 2.0 for user access.
Location and function of DIP switches on the system board.
Configuration settings for system board jumpers and DIP switches.
Procedure to disable system and setup passwords using DIP switches.
Overview of the embedded diagnostics tool (ePSA).
How to run diagnostics from the Boot Manager.
How to run diagnostics from the Dell Lifecycle Controller.
Description of controls and features within the diagnostics interface.
Information on product recycling and disposal services.
Methods and steps to contact Dell for support and services.
Using Quick Resource Locator (QRL) for system information.
Benefits and use of Dell SupportAssist for automated support.
Links to further documentation, manuals, and support resources.
To Next Page
General