Need help?Do you have a question about the Dell PowerEdge XR12 and is the answer not in the manual?
General| Maximum RAM | 8TB |
|---|---|
| Management | iDRAC9 with Lifecycle Controller |
| Processor | Intel Xeon Scalable processors |
| Memory | DDR4 ECC RDIMM |
| Storage | 4 x 2.5" or 3.5" hot-swappable drives |
| Networking | 2 x 1GbE ports |
| Power Supply | 800W |
| RAID Controllers | PERC H345 |
| Operating Systems | Windows Server, Red Hat Enterprise Linux, SUSE Linux Enterprise Server, VMware ESXi |
| Form Factor | 1U Rack Server |
Describes the front panel components and features of the server, including status and control panels.
Details the components and ports visible on the rear of the server, including connectivity options.
Explains the system status and health indicators on the front panel.
Describes the system power button, USB ports, and iDRAC Direct port.
Provides an overview of internal components visible when the system cover is removed.
Explains how to find the system's Service Tag and Express Service Code.
Describes the location and content of the system information label.
Provides information on compatible rail solutions and rack compatibility.
Outlines the basic steps for unpacking, installing, and powering on the system.
Explains the purpose and initial configuration steps for iDRAC.
Details the methods for accessing the iDRAC Web User Interface.
Lists resources and documentation for installing an operating system.
Provides methods and links for downloading system firmware.
Explains the process of downloading the latest BIOS, drivers, and firmware.
Lists options for downloading and installing operating system drivers.
Lists the essential components required for the system to power on.
Explains how the system validates its configuration during POST.
Describes common error messages related to system configuration and their meanings.
Provides crucial safety precautions to follow before performing any component removal or installation.
Details the prerequisite steps to take before opening the system.
Lists the necessary tools for performing component removal and installation procedures.
Instructions for removing and installing the front bezel of the server.
Details the procedure for removing and installing the bezel filter.
Provides steps for removing and installing the system cover.
Instructions for removing and installing the air shroud for proper cooling.
Covers the installation and removal of expansion cards and their associated risers.
Covers the installation and removal of drives and related components.
Details the removal and installation of system cooling fans.
Provides guidelines and information about system memory (DIMM) installation.
Details the removal and installation of the processor and its heat sink.
Information regarding the system's power supply units and hot spare feature.
Covers the removal and installation of the system board.
Introduction to the control panel components like LEDs and buttons.
Instructions for installing the MIL 901E and MIL 461G rugged kit components.
Identifies and describes various connectors on the system board.
Explains the function and configuration of system board jumpers.
Procedure to disable system or setup passwords using jumpers.
Describes the status LED indicators on the front panel and their meanings.
Explains the system health and ID indicator meanings.
Describes the LED indicators for the iDRAC Direct port.
Explains the status and activity indicators for the Network Interface Cards (NICs).
Details the indicator lights on the AC and DC power supply units.
Explains the status and activity indicators on the drive carriers.
Guides on running system diagnostics for troubleshooting.
Information about the Dell Embedded System Diagnostics (ePSA).
Information on product disposal and recycling services.
How to contact Dell for support, sales, and technical assistance.
Using Quick Resource Locator (QRL) to access system information.
Details on using Dell SupportAssist for automated technical support.
To Next Page