Dell PowerEdge XR12

Table 34. Status LED indicators and descriptions (continued)
Icon Description Condition Corrective action
voltage out of range, or a failed
power supply unit (PSU) or voltage
regulator).
the PSU, check the LED on the PSU. Reseat the
PSU.
If the problem persists, see the
Getting help section.
Memory indicator The indicator turns solid amber if a
memory error occurs.
Check the System Event Log or system messages
for the location of the failed memory. Reseat the
memory module.
If the problem persists, see the
Getting help section.
PCIe indicator The indicator turns solid amber if a
PCIe card experiences an error.
Restart the system. Update any required drivers for
the PCIe card. Reinstall the card.
If the problem persists, see the
Getting help section.
NOTE: For more information about the
supported PCIe cards, see the Expansion card
installation guidelines section.
System health and system ID indicator codes
The system health and system ID indicator is located on the Status LED Control Panel of the system for Rear and Front
Accessed configurations.
Figure 140. System health and system ID indicator
128
System diagnostics and indicator codes