Need help?Do you have a question about the Dell EMC PowerEdge XE8545 and is the answer not in the manual?
General| Processor | Up to two 3rd Generation AMD EPYC Processors |
|---|---|
| Memory | Up to 4TB DDR4 ECC RDIMM/LRDIMM (32 DIMM slots) |
| Storage | Up to 24x 2.5" SAS/SATA (HDD/SSD) or NVMe drives |
| GPU Support | Up to 4 double-wide GPUs |
| Power Supply | 2400W |
| Form Factor | 2U |
| Operating System | Canonical Ubuntu Server LTS |
| Networking | Optional: 1 x OCP 3.0 card |
Provides an overview of the system, installation, specifications, and diagnostics.
Details system specifications, supported components, and general system information.
Identifies components and features on the front of the server system.
Details the indicators and controls on the left side of the system's front panel.
Details the ports and buttons on the right side of the system's front panel.
Identifies ports, slots, and connectors on the rear of the system.
Illustrates and labels major internal hardware components of the system.
Explains how to locate and understand system identification and service tags.
Provides guidance on rail solutions and rack mounting compatibility for the system.
Outlines the general steps for initial system setup and configuration.
Covers setting up iDRAC IP addresses and logging into the iDRAC interface.
Lists resources for installing OS, downloading firmware, and installing OS drivers.
Covers essential safety, preparation, and recommended tools for component servicing.
Instructions for removing and installing the system's front bezel.
Covers the process of removing and installing the main system cover.
Instructions for removing and installing the Graphics Processing Unit (GPU) fans.
Guidance for removing and installing the middle section of the system top cover.
Covers procedures for the system's air shrouds for cooling.
Instructions for removing and installing individual cooling fans.
Guidance for removing and installing the entire cooling fan cage.
Instructions for removing and installing the side wall brackets.
Covers installation and removal of drives, carriers, and blanks.
Covers removal and installation of the drive backplane.
Details on GPU assembly thermal restrictions, removal, and installation.
Instructions for removing and installing the hot-plug fan board.
Covers memory installation guidelines, population rules, and module replacement.
Illustrations showing cable connections within the system.
Covers removal and installation of processors and heat sinks.
Guidance on installing, removing expansion cards and risers.
Instructions for removing and installing M.2 SSD modules.
Procedure for replacing the system's internal battery.
Instructions for removing and installing the intrusion switch module.
Instructions for removing and installing the Optional OCP card.
Covers removal and installation of the Versabay assembly.
Covers PSU hot spare feature, removal, installation, and blank procedures.
Covers TPM upgrading, initialization, and installation.
Covers system board removal, installation, and service tag restoration.
Instructions for removing and installing the Rear IO and LOM cards.
Covers PDB view, removal, and installation.
Covers removal and installation of system control panels.
Identifies and describes connectors and jumpers on the system board.
Details system board jumper settings and disabling forgotten passwords.
Explains the meaning and conditions for system status LEDs.
Details the system health and identification indicator codes.
Describes GPU fan and iDRAC Direct LED indicator codes.
Information on LCD panel features and navigating the Home screen.
Details options within the system setup and view menus.
Explains NIC, PSU, and drive indicator codes.
Guide to running Dell Embedded System Diagnostics.
Information on recycling services and how to contact Dell support.
Guide to using the Quick Resource Locator (QRL) for system information.
Overview of Dell EMC SupportAssist for automated technical support.
To Next Page