Figure 32. Installing the side wall bracket
Next steps
1. Install the cooling fan assembly.
2. Install the air shroud.
3. Install the GPU air shroud.
4. Install the middle top cover.
5. Follow the procedure listed in the After working inside your system on page 24.
Drives
Removing the drive carrier
Prerequisites
1. Follow the safety guidelines listed in the Safety instructions on page 23.
2. If installed, remove the front bezel.
3. Using the management software, prepare the drive for removal.
If the drive is online, the green activity or fault indicator blinks while the drive is powering off. When the drive indicators are
off, the drive is ready for removal. For more information, see the documentation for the storage controller.
CAUTION:
Before attempting to remove or install a drive while the system is running, see the documentation
for the storage controller card to ensure that the host adapter is configured correctly to support drive
removal and insertion.
Installing and removing system components 41
To Next Page
Loading...
