Installing and removing system components
Topics:
• Safety instructions
•
Before working inside your system
• After working inside your system
• Recommended tools
• Optional front bezel
• System cover
• GPU fan
• Middle top cover
• Air shroud
• Cooling fan
• Side wall brackets
• Drives
• Drive backplane
• Nvidia A100 GPU assembly
• Hot-plug fan board
• System memory
• Cable routing
• Processor and heat sink
• Expansion cards and expansion card risers
• M.2 SSD module
• System battery
• Intrusion switch module
• Optional OCP card
• Versabay assembly (Power Interposer Board)
• Power supply unit
• Trusted Platform Module
• System board
• Rear IO and LOM card
• Power distribution board
• Control panel
Safety instructions
NOTE: To avoid injury, do not lift the system on your own. Get others to assist you.
WARNING: Opening or removing the system cover while the system is turned on may expose you to a risk of
electric shock or injury due to moving parts such as fan blades.
CAUTION: Many repairs may only be done by a certified service technician. You should only perform
troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or
telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by
your warranty. Read and follow the safety instructions that are shipped with your product.
CAUTION: To ensure proper operation and cooling, all system bays and fans must be always populated with a
component or a blank.
4
Installing and removing system components 23
To Next Page
Loading...
