YDT-35 Operating and Servicing Manual
34 HL066(EN) ISSUE 1, 05/2015
BOSCH
DENSO
DELPHI
VDO
ALL
Figure 4.13 Injector Selection Screen
Use the up/down arrow keys to place the cursor next to the required option.
Then press the ‘Start’ key to select the option.
4.3.1.4 Pressure regulator
Use the regulator to set the test pressure
Pull outward and twist Anti-Clockwise to decrease the high pressure
supply.
Pull outward and twist Clockwise to increase the high pressure supply.
Push inward to lock the regulator in position.
4.4 Tests
Refer to Figure 4.14
To access the Test screen:-
From the YDT-35 Start-Up screen,
Press the Start key.
The Fluid and Filter hours will be displayed on screen -
Press the Start key to continue.
THIS IS AN UNCONTROLLED DOCUMENT downloaded by Lukas Matuska on 16 Feb 2016
Any technical intervention requires certified Hartridge training. Contact Hartridge Ltd for details.
To Next Page
Loading...