DELTA DORE Tybox 137+ - Programme Verification; Return to Initial Programme

18
How to set a daily programme (PROG x7)
7.3 Programme verication
7.4 Return to initial programme
You want to reset to the initial programmes.
❶ Turn the dial to PROG.
❷ Press + or - to choose the programme to
change.
❸ Conrm with OK.
The programme prole ashes.
❹ Press OK to choose the day
to change.
Programming begins on day 1 (Monday)
and at 12 a.m.
1: Monday, ... 7: Sunday,
❺ Create your programme by pressing
for
Economy periods and for
Comfort periods.
You can check your programme by
pressing the
buon (see § Programme
verication).
❻ Conrm with OK and go to programming
for the next day
OR copy the programme to the next
day (COPY function) by pressing OK for 3
seconds.
Repeat for each day of the week.
❼ To exit the mode, turn the dial.
EXIT
1
2
3
4
5
6
7
COPY function
Used to copy the programme from one
day to the next.
To do this, press and hold the OK (❻)
buon for 3 seconds.
The arrow will move to the next day,
ensuring the copy has occurred.
Once your programme has been
changed, you can check it by
successively pressing the buon
.
If it suits you, conrm with OK and
go to the next day
(if PROGx7).
To exit the mode, turn the selector
dial.
EXIT
1
2
3
4
5
6
EXIT
❶ Turn the dial to PROG.
❷ Press + or - to display “rES Pr”.
❸ Conrm with OK.
❹ Press + or - to make “YES” ash.
❺ Conrm with OK.
❻ To exit the mode, turn the dial.