DELTA DORE Tybox 137+ - Manual Mode Operation; Absence Mode Setup; Off Mode Function

19
8. Manual mode
This mode is used to set a constant temperature (5 to 30°C)
This seing may be restricted (menu 2-01 = 1).
In this mode, all programming is ignored (Tybox and Tydom app), and so are
manually triggered scenarios (Tydom) and voice assistant commands.
❶ Turn the dial to
.
The “manual mode” setpoint temperature ashes.
❷ ❸ Press + or - to set, then OK to conrm.
Turn the dial to exit the mode.
9. Absence mode
10. Off mode
This mode switches o your heating system.
Turn the dial to .
In this mode, the thermostat only displays the room temperature.
5°C
30°C
2
3
1
131 112 2021 ...
28/02/2021
00.00
1
2
3
4
5
6
This mode sets your home heating to Frost Protection if you are away for several days.
The Frost protection setpoint is adjustable (see «Adjusting temperatures»).
❶ Turn the dial to
.
❷-> ❹ Set the return date with + or -, then conrm
with OK (❺). The countdown begins.
❻ Return to initial mode (AUTO or manual) at the end
of the countdown, at 0h00.
- To make changes to the current mode, press OK.
- To cancel, turn the selector dial.
- The return date seing is not available if
programming on the Tydom app is active (menu 1-10 = 1).
Temperature set in
absence mode
Number of days
remaining before return
to normal mode
(AUTO or manual)
STOP