DELTA DORE Tybox 137+ - Configuring Your Device (Menu 1)

5
4. Configuring your device (Menu 1)
Menu 1-02 Programme duration
You can set programming by the hour, half hour, or quarter of an hour.
Default seing: 1 hour.
60 min.
30 min.
15 min.
Menu 1-03 Pre-heat activation/deactivation
Pre-heat means you can enjoy the Comfort temperature you want at the scheduled hour (see § "Pre-heat
function").
Default seing: Pre-heat o
Pre-heat o
Pre-heat on
Menu 1-04 Selecting the way the receiver relay opens
Tybox allows you to choose which way the relay opens to suit all use cases.
Default seing: Relay normally open
The relay is normally open
The relay is normally closed
Menu 1-08 Controlling the Comfort temperature
For hot water heaters with thermostatic valves, the Comfort temperature can be provided by adjusting the
thermostat on each radiator.
In AUTO mode, the device will show "Conf" during Comfort periods and will be set to constant heating. Only the
Economy and Frost Protection temperatures are controlled by the Tybox.
Default seing: Comfort temperature is controlled by the Tybox.
Comfort temperature controlled by Tybox
Comfort temperature controlled by each radiator
>5s
2
0
1
0
EXIT
1
2
3
4
5
6
❶ Turn the dial to , then press the
i buon for 5 seconds (❷).
❸ Press the 1 buon.
To change the various seings,
press the + or - buons (❹), then
press OK to conrm the change and
go to the next seing (❺).
❻ To exit the mode, turn the dial.
Menu 1-02 does not appear if your Tybox is
linked with the Tydom app (menu 1-10 = 1).
Menu 1-03 does not appear; -
if your Tybox is linked with the Tydom app
(menu 1-10 = 1).
- if the Comfort temperature is controlled by
each radiator (menu 1-08 = 1).
Menu 1-08 does not appear: -
if your Tybox is linked with the Tydom app
(menu 1-10 = 1).
- if pre-heat is on (1-03 = 1).
Choice 1 turns o pre-heat (1-03 = 0). In this
case, menu 1-03 no longer comes up.