Delta ASD-A2R-0421 Series - Page 415

Chapter 8 ParametersASDA-A2R Series
Revision December, 2014
8-183
If the symbol of this parameter is + , it means the received forward
pulse is regarded as the lead pulse.
If the symbol of this parameter is - , it means the received reverse
pulse is regarded as the lead pulse.
P5-88■
ECON E-CAM: Activate E-Cam Control
Address: 05B0H
05B1H
Operation
al
Interface：
Panel / Software Communication
Related Section:
7.11
Default：
00000000h
Control
Mode：
PR
Unit：
-
Range：
0 ~ 0x203FF251
Data
Size：
32bit
Format：
HEX