Delta C2000 Plus Series - Page 398

Chapter 11 Summary of Parameter SettingsC2000 Plus
11-11
01 Basic Parameters
Pr. Parameter Name Setting Range Default

01-00
Maximum Operation
Frequency
0.00–599.00 Hz
60.00 /
50.00

01-01
Motor 1 Rated / Base
Frequency
0.00–599.00 Hz
60.00 /
50.00

01-02
Motor 1 Rated / Base Output
Voltage
230V models: 0.0–255.0 V
460V models: 0.0–510.0 V
575V models: 0.0–637.0 V
690V models: 0.0–765.0 V
200.0
400.0
600.0
660.0
01-03 Motor 1 Mid-Point Frequency 1 0.00–599.00 Hz 3.00

01-04 Motor 1 Mid-Point Voltage 1
230V models: 0.0–240.0 V
460V models: 0.0–480.0 V
575V models: 0.0–637.0 V
690V models: 0.0–720.0 V
11.0
22.0
0.0
0.0
01-05 Motor 1 Mid-Point Frequency 2 0.00–599.00 Hz 1.50

01-06 Motor 1 Mid-Point Voltage 2
230V models: 0.0–240.0 V
460V models: 0.0–480.0 V
575V models: 0.0–637.0 V
690V models: 0.0–720.0 V
5.0
10.0
0.0
0.0
01-07
Motor 1 Minimum Output
Frequency
0.00–599.00 Hz 0.50

01-08
Motor 1 Minimum Output
Voltage
230V models: 0.0–240.0 V
460V models: 0.0–480.0 V
575V models: 0.0–637.0 V
690V models: 0.0–720.0 V
1.0
2.0
0.0
0.0
01-09 Start-Up Frequency 0.00–599.00 Hz 0.50

01-10 Output Frequency Upper Limit 0.00–599.00 Hz
599.00

01-11 Output Frequency Lower Limit 0.00–599.00 Hz
0.00

01-12 Acceleration Time 1
Pr.01-45 = 0: 0.00–600.00 sec.
Pr.01-45 = 1: 0.00–6000.0 sec.
The default of motor drive with 30HP and above:
60.00 / 60.0
10.00

01-13 Deceleration Time 1
Pr.01-45 = 0: 0.00–600.00 sec.
Pr.01-45 = 1: 0.00–6000.0 sec.
The default of motor drive with 30HP and above:
60.00 / 60.0
10.00

01-14 Acceleration Time 2
Pr.01-45 = 0: 0.00–600.00 sec.
Pr.01-45 = 1: 0.00–6000.0 sec.
The default of motor drive with 30HP and above:
60.00 / 60.0
10.00