Delta C2000 Plus Series - Page 603

Chapter 12 Descriptions of Parameter SettingsC2000 Plus
12.1-06-16
Fault Code
bit0 bit1 bit2 bit3 bit4 bit5 bit6
current Volt. OL SYS FBK EXI CE
39: occ hardware error (Hd3)
●
40: Auto-tuning error (AUE)
●
41: PID loss ACI (AFE)
●
42: PG feedback error (PGF1)
●
43: PG feedback loss (PGF2)
●
44: PG feedback stall (PGF3)
●
45: PG slip error (PGF4)
●
48: ACI loss (ACE)
●
49: External fault (EF)
●
50: Emergency stop (EF1)
●
51: External base block (bb)
●
52: Enter wrong password three times and locked
(Pcod)
●
53: SW code error (ccod)
●
54: Illegal command (CE1)
●
55: Illegal data address (CE2)
●
56: Illegal data value (CE3)
●
57: Data is written to read-only address (CE4)
●
58: Modbus transmission time-out (CE10)
●
60: Brake transistor error (bF)
●
61: Y-connection / ∆-connection switch error (ydc)
●
62: Deceleration energy backup error (dEb)
●
63: Over slip error (oSL)
●
64: Electric valve switch error (ryF)
●
65: Hardware error of PG card (PGF5)
●
68: Reverse direction of the speed feedback (SdRv)
●
69: Over speed rotation feedback (SdOr)
●
70: Large deviation of speed feedback (SdDe)
●
71: Watchdog (WDTT)
(applied to 230V / 460V models)
●
72: STO loss 1 (STL1)
●
73: Emergency stop for external safety (S1)
●
75: External brake error (Brk)
(applied to 230V / 460V models)
●
76: Safe torque off (STO)
●
77: STO Loss 2 (STL2)
●
78: STO Loss 3 (STL3)
●
82: Output phase loss U phase (OPHL)
●