Chapter 13 Warning CodesC2000 Plus
ID No. Display on LCD Keypad Warning Name Description
63
CAN/M node lack
(PCnL)
CANopen Master node error
Action and Reset
Action condition
When the C
ANopen master configures different setting nodes from the actual
nodes, the PCnL warning displays.
Action time Immediately displays when the fault is detected
Warning setting parameter N/A
Reset method
When connect BUS to the original slave, or change the configured
to meet the actual node quantity, the warning automatically clears.
Reset condition N/A
Record N/A
Cause Corrective Actions
The configured node quantity is
different from the actual nodes
Connect BUS to the original slave, or change the configured
meet the actual node quantity
Communication cable is broken or
bad connected
Check or replace the communication cable.
To Next Page
Loading...
