Chapter 13 Warning CodesC2000 Plus
ID No. Display on LCD Keypad Warning Name Description
132
Home Proc. Fault
(HPF)
Unusual signal occurs during the homing process,
Action and Reset
Action condition N/A
Action time Immediately acts
Warning Setting Parameter N/A
Reset method Stop running the motor drive, then manual reset.
Reset condition Immediately resets
Record N/A
Cause Corrective Actions
Unusual external signal is enabled
Verify if there’
s any error or signal is enabled and then interrupts the homing
process.
Press the STOP button during the
homing process
Verify if anything wrong at control sequence.
To Next Page
Loading...
