10. In the Devices window, select EtherCAT_Master (AX-8xxEP0 Series EtherCAT Master), then go to
EtherCAT I/O Mapping tab to make sure that Bus Cycle Options is set as EtherCAT_Task.
11. In the Devices window, right click on the EtherCAT_Master (AX-8xxEP0 Series EtherCAT Master),
then select Scan for Devices.
Send Quote Requests to info@automatedpt.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com
Send Quote Requests to info@automatedpt.com
Call +1(800)985-6929 To Order or Order Online At Deltaacdrives.com
To Next Page
Loading...
