Delta DPS Series User Manual

Ultron DPS Series
132
Output Dry
Contact No.
Event Selection Type
Output Dry Contact 1
Output Dry Contact 2
Output Dry Contact 3
Output Dry Contact 4
Output Dry Contact 5
Output Dry Contact 6
1. None
2. Load On Inverter
3. Load On Bypass
4. Load On Battery
5. Battery Low
6. Battery Input Abnormal
7. Battery Test Fail
8. Internal Comm. Fail
9. External Parallel Comm. Fail (only
applicable to parallel application)
10. Output Overload
11. EPO Activated
12. Load On Manual Bypass
13. Battery Over Temperature
14. Output Voltage Abnormal
15. Battery Need Replacement
16. Bypass Over Temperature
17. Bypass Static Switch Fault
18. UPS Over Temperature
19. Battery Breaker Shunt Trip
20. Backfeed Protection
21. UPS General Alarm
Set up NO (normally
open) or NC
(normally closed) for
each output dry
contact.

Delta DPS Series Specifications

General

Frequency	50/60 Hz
Battery Type	Sealed Lead-Acid (SLA)
Communication Interface	RS-232, USB, SNMP (Optional)
Output Voltage	220/230/240VAC
Topology	Double Conversion
Form Factor	Tower or Rackmount
Power Factor	0.9
Type	Online UPS
Protection Features	Short Circuit