Ultron DPS Series
14
No. Item Q’ty
14
M5 Screw (used when fixing the rodent shields) 20 PCS
15
Plastic Rivet (spare accessories) 36 PCS
16
4-Pin Dry Contact Terminal Block (used for REPO dry
contacts)
1 PC
17
6-Pin Dry Contact Terminal Block (used for MODBUS and
BMS ports)
1 PC
18
8-Pin Dry Contact Terminal Block (used for (1) external battery
temperature dry contacts and (2) external switch/ breaker
status dry contacts)
2 PCS
19
10-Pin Dry Contact Terminal Block (used for input/ output dry
contacts)
2 PCS
2.3 Functions & Features
• Hot-swappable communication interfaces realize on-line maintenance and reduce the
MTTR (Mean Time to Repair).
• Automatic input frequency detection enables operation at 50Hz or 60Hz.
• Automatic restart:
1. After a low battery shutdown, the UPS inverter will restart in normal mode
automatically right after the AC input resumes.
2. The UPS returns automatically to normal mode from Bypass mode after an overload
condition is cleared.
• Automatically detects whether bypass voltage is out of the rated voltage. If yes, the UPS
will stop supplying power to the critical loads to protect your electronic equipment.
• Supports ECO mode.
• Both auxiliary power and control circuit adopt redundancy design, which doubly
enhances UPS reliability.
• Allows maintenance for the power modules and system components from the top and
front of the unit.
• Generator compatible.
• Surge protection and EMI filter functions.
• Remote emergency power off.
• Single input and dual input functions.
• Supports external switch/ breaker status detection.
To Next Page
Loading...
Need help?
General