ii
2.4.1 The output value varies with the PV value. ..................................... 2-21
2.4.2 Alarm Outputs ............................................................................ 2-21
2.5 ON/OFF Control Mode ...................................................................... 2-23
2.6 PID Control Mode ............................................................................ 2-24
2.7 Programmable SV Control Mode ...................................................... 2-28
2.8 ERROR LED Indicator ....................................................................... 2-28
2.9 Automatic PID Calculation Feature .................................................. 2-29
2.9.1 Feature Description ..................................................................... 2-29
2.9.2 Setup Instructions ...................................................................... 2-29
2.9.3 Additional Instruction .................................................................. 2-30
2.10 RS-485 Communication Setup for DVP02TK-S ................................. 2-30
2.10.1 MODBUS Communication Protocol .................................................... 2-30
2.10.2 Restore to Factory Settings .............................................................. 2-30
2.10.3 RS-485 Communication Setup ......................................................... 2-30
2.11 TK Wizard – Connection Setup ......................................................... 2-33
2.11.1 Restore to Factory Settings for DVP02TK-S ........................................ 2-33
2.11.2 COMMGR Set Up ............................................................................ 2-33
2.11.3 Settings in TKSoft .......................................................................... 2-33
2.11.4 TKSoft – Scan the Connected Devices ............................................... 2-34
To Next Page
Loading...