DVS Series Managed Industrial Ethernet Switches User’s Manual
3-24
Description Factory Default
Server Address
Enter an IPv4 address or a DNS host name of the TFTP server. None
Remote File Name
Enter the name of the file that you want to download to the switch. You
can enter up to 32 characters.
None
If you select Archive in the File Type drop down list, the image name item will show up. After
selecting File Type, setting up Server Address and specifing Remote File Name, click Apply to
start downloading.
HTTP Download
HTTP Download
Description Factory Default
File Type
Specify the type of file in the drop down list that you want to download:
Archive: When you select Archive, the Image Name drop-down list
is displayed.
Startup Configuration: When the switch boots up, the Startup
Configuration will be applied.
SSL Server Certificate PEM File. For more information about the
SSL server certificate PEM file, please see the Certificate
Information page.
Script File: This file is used to configure the switch by the CLI script.
None
Image Name
Only when you select Archive from the File Type drop-down list is the
Image Name drop-down list displayed. Specify the image:
image1: The downloaded image firmware as image1.
image2: The downloaded image firmware as image2.
image1
Select File
Specify the file that you want to download. None
If you select Archive in the File Type drop down list, the image name item will show up. After
selecting File Type and the path of the file on your PC, click Apply to start downloading.
To Next Page
Loading...
Need help?
General
