Delta DVS Series - Alarms

Chapter 3 Featured Functions
3.12.5.2 Alarms
The RMON Alarm Configuration provides you to specify the threshold and generate the alarm.
When the alarm occurs, an event can be generated. Before you configure alarms, you need to
specify logs and SNMP traps that can be generated when an alarm occurs by configuring entries in
the RMON Event Configuration page.
RMON Alarm Configuration
Description Factory Default
Index
Enter an index that uniquely identifies the entry in the RMON Alarm
Configuration table. Enter a number between 1 and 65535.
None
Interval
Specify the period in seconds over which the data is sampled and
compared with the rising and falling thresholds. Enter a number
between 1 and 65535 seconds.
None
Interface
Specify the interface number. None
Variable
Specify the SNMP MIB variable (object) that you want to be sampled. None
3-101