Delta DVS Series User Manual

Chapter 3 Featured Functions
3-47
Description Factory Default
Port Mode
Specify the Spanning Tree Protocol (STP) administrative mode that is
associated with the port or port channel:
 Disable: STP is disabled for the port or port channel.
 Enable: STP is enabled for the port or port channel.
Note:
You can also change the administrative mode for a port
channel by making a selection from the STP Mode
drop-down list on the LAG Configuration page.
Enable
Port Forwarding State
This field displays whether the port is up and forwards traffic
(Forwarding) or down and discards traffic (Discarding).
Discarding
Protocol Migration
Force the specified port to set the mcheck flag to transmit RST or MST
BPDUs:
 True: The interface can receive the BPDU flood.
 False: The interface cannot receive the BPDU flood.
False
PointToPoint Status
Specify the point-to-point status of the interface in the CIST:
 ForceTrue: The interface has a point-to-point connection to a
switch, bridge, or end node, irrespective of the actual connection.
 ForceFalse: The interface does not have a point-to-point
connection to a switch, bridge, or end node, irrespective of the
actual connection.
 Auto: The type of connection is automatically detected.
Auto

Delta DVS Series Specifications

General

Brand	Delta
Model	DVS Series
Category	Switch
Language	English