Delta NT Series User Manual

Chapter 6 UPS Display and Settings
82

z
Press the
“
” and “ ”
buttons simultaneously to go back to the “System Con-
trol” menu.
To leave the “
System Control
” menu, press the “
” and “ ” buttons simultaneously
to go back to the “
Main Menu
”.
7. In
“
Main Menu”, press the “ ” or “ ”
button to choose “Event Log” and press
the “
” button to enter the “Event Log”
page.
Æ
Measure Page
Parameter Setting
System Control
Event Log
Other Information
In the “Event Log” page, press the “ ”
or “
” button to check the UPS present
status. The event log is helpful for
analysis of UPS malfunction. The event
log can record up to 500 records. When
the total number of records exceeds
500, the old records will be overwritten.
<0010>02/10/20 12:10:12
Load On Inverter
<0011>02/10/20 15:15:20
Inverter Over Load
. .
. .
. .
. .
<0102>02/11/15 08:10:30
Input Voltage Abnormal
..
To leave the “
Event Log
” menu, press the “
” and “ ” buttons simultaneously to go
back to the “
Main Menu
”.

Delta NT Series Specifications

General

Brand	Delta
Model	NT Series
Category	UPS
Language	English