5. Fault Diagnostic Methods
5-13
5-10 Environmental Condition
Since Hybrid servo drive is an electronic device, you should comply with the environmental condition stated
in the appendix A. Following are the remedial measures for necessary.
6. To prevent vibration, anti-vibration spacer is the last choice. The vibration tolerance must be within
the specification. The vibration effect is equal to the mechanical stress and it cannot occur
frequently, continuously or repeatedly to prevent damaging
Hybrid servo drive.
7. Store in a clean and dry location free from corrosive fumes/dust to prevent rustiness, poor contact.
It also may cause short by low insulation in a humid location. The solution is to use both paint and
dust-proof. For particular occasion, use the enclosure with whole-seal structure.
8. The surrounding temperature should be within the specification. Too high or low temperature will
affect the lifetime and reliability. For semiconductor components, damage will occur once any
specification is out of range. Therefore, it is necessary to clean and periodical check for the air
cleaner and cooling fan besides having cooler and sunshade. In additional, the microcomputer may
not work in extreme low temperature and needs to have heater.
1. Store within a relative humidity range of 0% to 90% and non-condensing environment. Do
not turn off the air conditioner and have exsiccator for it.
To Next Page
Loading...
Need help?
General
