Delta VFD110VL43A-J User Manual

4-14
4-2 Detailed Description of Parameters
00 System Parameters a the parameter can be set during opera
tion
Hybrid servo drive model code ID
Control mode VF FOCPG FOCPM
Factory default: Read only
Settings Read only
Display of rated current of the Hybrid servo drive
Control mode VF FOCPG FOCPM
Factory default: Read only
Settings Read only
 Parameter 00-00 is used to determine the capacity of the Hybrid servo motor which has been
configured in this parameter in factory. In addition, the current value of Parameter (00-01) can be
read out to check if it is the rated current of the corresponding model.
Display value of the current
value of Parameter 00-01 for the related Parameter 00-00.
230V Series
Power (KW)
5.5 7.5 11 15 18.5 22 30 37
Horse Power (HP)
7.5 10 15 20 25 30 40 50
Model ID
12 14 16 18 20 22 24 26
460V Series
Power (KW)
5.5 7.5 11 15 18.5 22 30 37 45 55 75
Horse Power (HP)
7.5 10 15 20 25 30 40 50 60 75 100
Model ID
13 15 17 19 21 23 25 27 29 31 33
Reset parameter settings
Control mode VF FOCPG FOCPM
Factory default: 0
Settings 0: No function
5: Rest the kWh at drive stop
10: Reset parameter values
 If it is necessary to restore the parameters to factory default, just set this parameter to “10”.
Software version
Control mode VF FOCPG FOCPM
Factory default: #.##
Settings
Read only
a
Selection of multi-function display
Control mode VF FOCPG FOCPM
Factory default: 0
Settings 0: Display the output current (A)
U
1: Reserved
2: Display the actual output frequency (H)
U

Delta VFD110VL43A-J Specifications

General

Brand	Delta
Model	VFD110VL43A-J
Category	Servo Drives
Language	English