Delta VFD110VL43A-J User Manual

1-2
1-1 Receiving and Inspection
This VFD-VJ Hybrid servo drive has gone through rigorous quality control tests at the factory before
shipment. After receiving the Hybrid servo drive, please check for the following:
; Inspect the unit to assure it was not damaged during shipment.
; Make sure that the part number indicated on the nameplate corresponds with the part number of
your order.
If the registered information does not match your purchase order, or if the product has any problem,
please contact the dealer or distributor.
Nameplate Information
Let us take the 15HP/11kW 230V 3-Phase model as an example.
MODEL
INPUT
OUTPUT
Freq. Range
Version: 1.00
: VFD110VL23A-J
: 3PH 180-264V 50/60Hz 43A
: 3PH 0-230V 41.1A
11kW/15HP
: 0~600Hz
110VL23AJT9310002
AC Drive Model
Input Spec.
Output Spec.
Output Frequency Range
Software version
Bar Code
Serial Number
Model Explanation
VFD VL - 110 23 A J
Version Type
Mains Input Voltage
185:25HP(18.5kW)
220:30HP(22kW)
300:40HP(30kW)
370:50HP(37kW)
450:60HP(45kW)
550:75HP(55kW)
750:100HP(75kW)
23: 230V 3-PHASE
43:460V 3-PHASE
Applicable motor capacity
055:7.5HP(5.5kW)
075:10HP(7.5kW)
110:15HP(11kW)
150:20HP(15kW)
Delta's high-performance Hybrid servo drive
Series Number Explanation
319 T110VL23AJ
Production number
Production year 2009
Production factory
Production week
(T: Taoyuan, W: Wujian)
Model
230V 3-phase 15HP(11kW)

Delta VFD110VL43A-J Specifications

General

Brand	Delta
Model	VFD110VL43A-J
Category	Servo Drives
Language	English