1-8
3. The heat sink temperature may rise to 90°C when running. The material on which the Hybrid servo
drive is mounted must be noncombustible and be able to withstand this high temperature.
4. When Hybrid servo drive is installed in a confined space (e.g. cabinet), the surrounding temperature
must be within -10 ~ 40°C with good ventilation. DO NOT install the Hybrid servo drive in a space with
bad ventilation.
5. When installing multiple Hybrid servo drives in the same cabinet, they should be adjacent in a row with
enough space in-between. When installing one Hybrid servo drive below another one, use a metal
separation between the Hybrid servo drives to prevent mutual heating.
; Prevent fiber particles, scraps of paper, saw dust, metal particles, etc. from adhering to the heat
sink.
To Next Page
Loading...
Need help?
General
