EasyManuals Logo

Denon AVR-1706 Operating Instructions

Denon AVR-1706
61 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #47 background imageLoading...
Page #47 background image
PageDefault settingsSystem Setup
44
Advanced Setup Advanced Setup
ENGLISH
System setup items and default values (set upon shipment from the factory)
2
Speaker
Configuration
Input the combination of speakers in your system and their
corresponding sizes (SMALL for regular speakers, LARGE
for full-size, full-range) to automatically set the composition
of the signals output from the speakers and the frequency
response.
Front Sp.
Large
Center Sp. Surround Sp. Subwoofer
Small SmallYes
Surround Back
Sp.
Small / 2sp
Subwoofer
Mode
This selects the subwoofer speaker for playing deep bass
signals.
4
Subwoofer mode = Normal
38, 39
3
Delay Time
This parameter is for optimizing the timing with which the
audio signals are produced from the speakers and
subwoofer according to the listening position.
40
Front
L & R
Center
Surround
L & R
Subwoofer
12 ft 12 ft 10 ft12 ft
Surround Back
L & R
10 ft
39, 40
1 Auto Setup
Set this to switch the surround back channels power
amplifier for ZONE2 use.
Surround Back
8~10
42
Digital In
Assignment
This assigns the digital input terminals for the
different input sources.
Input
source
Digital
Inputs
CD AUX DVD / VDP TV / DBS
COAXIAL1 COAXIAL2 OPTICAL1 OPTICAL2
7
8
Video Input
Mode
Sets the input signal to be output from the monitor output
terminal.
AUTO
42
Crossover
Frequency
Sets the frequency (Hz) below which the bass sound of
the various speakers is to be output from the subwoofer.
5
80 Hz
40
6 Test Tone
This adjusts the volume of the signals output from the
speakers and subwoofer for the different channels in order
to obtain optimum effects.
Front
L & R
Center
Surround
L & R
Subwoofer
0 dB 0 dB 0 dB0 dB
Surround Back
L & R
0 dB
41
9 Audio Delay
Sets the audio delay to delay the sound and synchronize it
with the picture.
0 ms
43
Power Amp
Assignment
Sets this to switch the surround back channels power
amplifier for ZONE2 use.
Surround Back
4312
10
Auto
Surround
Mode
Auto surround mode function setting.
Auto Surround Mode = ON
43
Ext. In SW
Level
Sets the Ext. In Subwoofer channel playback level.
Ext. In SW Level = +15 dB
4311
ENGLISH

Table of Contents

Other manuals for Denon AVR-1706

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Denon AVR-1706 and is the answer not in the manual?

Denon AVR-1706 Specifications

General IconGeneral
Speakers connectivity type-
Receiver typeSurround
Frequency range10 - 100000 Hz
Audio output channels7.1 channels
Audio A/D Converter (ADC)24-bit/96kHz
Total Harmonic Distortion (THD)0.08 %
Power output per channel (1KHz@6 Ohm)110 W
Power output per channel (20-20KHz@8 Ohm)75 W
Composite video out2
Component video (YPbPr/YCbCr) out1
AC (power) inYes
Composite video in4
Component video (YPbPr/YCbCr) in3
AM band range520 - 1710 kHz
FM band range87.5 - 107.9 MHz
Supported radio bandsAM, FM
AC input voltage120 V
AC input frequency60 Hz
Optical drive includedNo
Product colorBlack
Audio decodersDTS 96/24, DTS-ES (Discrete 6.1), DTS-ES (Matrix 6.1), Dolby Digital EX, Dolby Pro Logic IIx
Apple docking compatibilityNot supported
Weight and Dimensions IconWeight and Dimensions
Depth417 mm
Width434 mm
Height147 mm
Weight11.3 g

Related product manuals