A
adamsanthonySep 10, 2025
Why can't I record a picture with my Denon AVR-1709 Receiver?
- JJeffrey LittleSep 10, 2025
The video conversion function does not work for the REC OUT connectors. Match the input source and recorder connections.
To Next PageTo Next PageWhy can't I record a picture with my Denon AVR-1709 Receiver?
The video conversion function does not work for the REC OUT connectors. Match the input source and recorder connections.
How to fix iPod not playing on Denon AVR-1709?
If your iPod isn't playing on your Denon Receiver, try the following: * Select the input source assigned to the control dock for iPod. * Reconnect the cable. * Ensure the control dock for iPod’s AC adapter is plugged into a power outlet.
Why are HDMI audio signals not output from speakers on my Denon AVR-1709 Receiver?
The audio signal input to the HDMI input connector cannot be played on the AVR-1709. Input the audio signal to the digital audio input connector or analog audio input connector.
How to fix no sound from speakers on my Denon AVR-1709 Receiver?
If no sound is coming from the speakers connected to your Denon Receiver, here are some things to check: * Make sure the connections to the input devices and speaker cables are correct. * Ensure the selected input source matches the device you want to play. * Adjust the master volume to a suitable level. * Deactivate mute mode, if it's on. * Disconnect any headphones that are plugged in. * If using digital signals, verify the input source is correctly set for digital input. * Set the appropriate input mode.
What to do if Denon Receiver power display flashes red?
If the power display on your Denon Receiver flashes red, it indicates that the amplifier circuit has failed. Switch off the power and please contact the DENON service adviser.
Why does no picture appear on my Denon AVR-1709 Receiver?
If you're not seeing a picture on your Denon AVR-1709 Receiver, consider these potential causes: * Faulty connections between the receiver and the monitor. * Incorrect input setting on the monitor. * Incompatible connections between the player and monitor (e.g., player using component, monitor using video). To resolve this: * Check all connections. * Ensure the monitor input is set correctly. * Match the connection types between the player and monitor.
How to troubleshoot no picture with HDMI connection on Denon AVR-1709?
If you're not getting a picture with HDMI connections on your Denon Receiver, try these troubleshooting steps: * Check all HDMI connections to ensure they are secure. * Verify the HDMI input setting on the receiver. * Confirm that the HDMI format of the player and the monitor are compatible.
Why is there no sound from the surround back speaker on my Denon AVR-1709 Receiver?
If there's no sound from the surround back speaker, here are some possible reasons: * The surround back speaker’s power amplifier is assigned to a different channel. Check the setting and change it if necessary. * Surround back speaker setting is set to “None”. Set it to something other than “None”. * The “Parameter” – “Surround Parameter” – “SB CH OUT” settings are “OFF”. Please set “Parameter” – “Surround Parameter” – “SB CH OUT” to settings other than “OFF”. * Surround mode is not set to a mode for 6.1- or 7.1-channel playback. Select a surround playback mode.
What to do if my Denon Receiver does not operate properly?
If your Denon Receiver isn't working correctly, it might be due to external noise or interference. Reset the microprocessor to resolve this.
Why is there no sound from the center speaker on my Denon AVR-1709?
If you're not hearing sound from the center speaker, and you are playing a monaural source (like TV or AM radio) in “STANDARD” (Dolby/ DTS Surround) mode, change the mode to something other than “STANDARD” (Dolby/ DTS Surround).
General| Number of Channels | 7.1 |
|---|---|
| HDMI Inputs | 3 |
| HDMI Outputs | 1 |
| HDMI Version | 1.3a |
| Component Video Inputs | 2 |
| Component Video Outputs | 1 |
| Digital Audio Inputs | 2 Optical, 2 Coaxial |
| Response Bandwidth | 10 Hz - 100 kHz |
| Signal-To-Noise Ratio | 100 dB |
| THD | 0.08% |
| Input Impedance | 47 kOhm |
| Input Sensitivity | 200 mV |
| Tuner Presets | 56 |
| HDMI Switching | Yes |
| Tuner Type | AM/FM |
| Preset Stations | 56 |
| Auto Calibration | Yes (Audyssey MultEQ) |
| Power Consumption | 460 W |
| Standby Power Consumption | 0.3 W |
| Power Output | 80 W per channel (8 ohms, 20 Hz - 20 kHz, THD 0.08%) |
| HDMI Features | Deep Color, x.v.Color |
| Dolby Formats | Dolby Digital, Dolby Digital EX, Dolby Pro Logic II, Dolby Pro Logic IIx, Dolby TrueHD |
| DTS Formats | DTS, DTS-ES, DTS 96/24, DTS Neo:6, DTS-HD Master Audio |
| Audio Decoders | Dolby Digital, DTS |
| Amplifier Output Details | 80 watts per channel (8 ohms, 20Hz-20kHz, 0.08% THD) |
| Video Inputs/Outputs | Composite |
| Audio Inputs/Outputs | Digital Optical |
| Remote Control | Yes |
| Dimensions | 434 x 171 x 377 mm |
| Weight | 21.6 lbs (9.8 kg) |
Identifies the product type covered in the manual.
Procedure for ensuring electrical safety before returning the unit to the customer.
Lists specific tools or kits required for servicing and firmware updates.
Explains how error history is presented on the FL display based on different conditions.
Details how the red POWER LED flashes to indicate protection incidents like ASO/DC or Thermal.
Detailed steps for measuring and adjusting the idling current for the audio section.
Section dedicated to troubleshooting power-related problems, including failure to turn on and fuse issues.
Specific analog video troubleshooting flow for the AVR-1709 model.
Detailed steps to diagnose no video/audio output issues, checking cables, players, and TV compatibility.
Visual representation of the audio signal path for specific models.
Details signal flow and level adjustments for the front audio channels.
Illustrates signal paths and levels specific to the subwoofer output.
Details the Integrated Circuits (ICs) used, including pin functions and descriptions.
Shows the physical layout of the main printed circuit board unit, indicating component and foil sides.
Lists semiconductor components for the Main P.W.B. Unit.
Lists capacitors used in the Main P.W.B. Unit, including types and values.
Lists semiconductor components for the Front P.W.B. Unit.
Lists semiconductor components for the Input P.W.B. Unit.
Lists semiconductor components for the Power P.W.B. Unit.
Lists semiconductor components for the CPU P.W.B. Unit.
Lists semiconductor components for the HDMI P.W.B. Unit.
Lists semiconductor components for the Video PWB Unit for specific models.
Lists semiconductor components for the 2CH Amp PWB Unit for specific models.
Lists semiconductor components for the Power PWB Unit for specific models.
Lists semiconductor components for the Sirius DAC PWB Unit, detailing semiconductors and capacitors.
Presents the first part of the main unit's schematic, detailing the Main Unit (1/2).
Presents the second part of the main unit's schematic, detailing the Main Unit (2/2).
Details the schematic for the Input Unit.
Shows the schematic diagram for the CPU Unit (1/3).
Presents the schematic diagram for the CPU Unit (2/3).
Shows the schematic diagram for the CPU Unit (3/3).
Details the schematic diagram for the Front Unit.
Presents the schematic diagram for the Speaker (SPK) Unit.
Shows the schematic diagram for the HDMI Unit (1/3).
Details the schematic diagram for the Sirius Unit (1/2).
Presents the schematic diagram for the Sirius Unit (2/2).
Shows the schematic diagram for the HDMI Unit (2/3).
Details the schematic diagram for the HDMI Unit (3/3).
Presents the schematic diagram for the Supply Unit.
Presents the schematic diagram for the Power Unit.
Shows the schematic diagram for the 2CH Amp Unit.
Details the schematic diagram for the Video Unit (1/4), focusing on C/S_VIDEO parts.
Presents the schematic diagram for the Video Unit (2/4), including component video parts.
Shows the schematic diagram for the Video Unit (3/4) covering DSP/HDMI/Power parts.
Details the schematic diagram for the Video Unit (4/4), focusing on D-VIDEO ONLY.
Presents the schematic diagram for the Power Unit specific to the AVR589 model.
