Denon AVR-1803 User Manual

Set mode switch 1 to “AUDIO” or “VIDEO”.
AUDIO.
cm
*VIDEO-
AA
Set the AUDIO side for the CD, tape deck or CDWMD
position, to the VIDEO side for the DVD/VDP, DEWCABLE,
VCR or TV positlon.
2
Set mode switch 2 to the component you want to operate.
“y?l r’L%J,,
3
3
Operate the component.
l For details, refer to the component’s operating Instructions.
.X Some models cannot be operated with this remote control unit
1. Digital video disc player (DVD,
DVD SETUP) system buttons
POWER
Power on/standby
(ON/SOURCE)
~.bb : Manual search
(forward and reverse)
n : stop
b Play
l44,w : Auto search
(to beginning of track)
II Pause
0 - 9, +I0 10 key
skip +
DISC skip
(for DVD changer only)
DISPLAY : Switch display
MENU : Menu
RETURN : Return
SETUP : Setup
A, n, <. r> Cursor up, down, left
and right
ENTER Enter setting
NOTE:
l Some
manufacturers
use
different names for the DVD
remote control buttons, so also
refer to the instructions on
remote
control
for that
component.
2. Video disc player WDP)
system buttons
POWER : Power on/standby
(ON/SOURCE)
44.H :
Manual search
(forward and reverse)
n : stop
b : Play
w,-
: Auto search (cue)
II : Pause
o-9, +I0 : 10 key
29

Denon AVR-1803 Specifications

General

Channels	6.1
Dolby Digital	Yes
DTS	Yes
Dolby Pro Logic II	Yes
Component Video Switching	No
Digital Inputs	2 optical, 1 coaxial
Type	AV Receiver
Frequency Response	10Hz-100kHz (+1, -3dB)
Signal to Noise Ratio	100 dB
Input Impedance	47 kOhms
Input Sensitivity	200 mV
Built-in Decoders	Dolby Digital, DTS, Dolby Pro Logic II
Width	17.1 inches
Tuner Frequency Range	FM: 87.5-108 MHz, AM: 522-1611 kHz
Power Output	80 W per channel (8 ohms, 20Hz-20kHz, 0.08% THD)
Inputs	5 A/V
Outputs	1 digital optical
Total Harmonic Distortion	0.08%
Audio D/A Converter	24-bit/96kHz