Denon AVR-S700W Service Manual

Error
Code
Details of Error code Display Coping strategies
5C
DSP, PLD etc. failed to receive the
rmware for rewriting sent from
CX870 (when timed out).
U p d a t i n g f a i l 5 C
Turn on the power again. Update will
start automatically.
5D
DSP, PLD etc. failed to receive the
rmware for rewriting sent from
CX870 (when an error occurred).
U p d a t i n g f a i l 5 D
Turn on the power again. Update will
start automatically.
5E
DSP, PLD etc. receive the cor-
rupted rmware data for rewriting
sent from CX870 (when the Check
Sum error occurred).
U p d a t i n g f a i l 5 E
Turn on the power again. Update will
start automatically.
5F
DSP, PLD etc. receive the cor-
rupted rmware data for rewriting
sent from CX870 (invalid data was
received).
U p d a t i n g f a i l 5 F
Turn on the power again. Update will
start automatically.
60
NACK was received when "P"
command was sent to DSP, PLD
etc.
U p d a t i n g f a i l 6 0
Turn on the power again. Update will
start automatically.
61
NACK was received when "I" com-
mand was sent to DSP, PLD etc.
U p d a t e C h e c k N G 6 1
Turn on the power again. Update will
start automatically.
80
Failed to obtain ash information
before erasing the ash.
U p d a t i n g f a i l 8 0
Turn on the power again. Update will
start automatically.
81
Failed to erase the data before
rewriting the ash.
U p d a t i n g f a i l 8 1
Turn on the power again. Update will
start automatically.
82
Failed to receive the serial ash
rmware for rewriting sent from
CX870 (when timed out).
U p d a t i n g f a i l 8 2
Turn on the power again. Update will
start automatically.
83
Failed to receive the serial ash
rmware for rewriting sent from
CX870 (when an error occurred).
U p d a t i n g f a i l 8 3
Turn on the power again. Update will
start automatically.
84
Failed to receive the serial ash
rmware for rewriting sent from
CX870 (when the Check Sum error
occurred).
U p d a t i n g f a i l 8 4
Turn on the power again. Update will
start automatically.
85
Failed to receive the the serial
ash rmware for rewriting sent
from CX870 (invalid data was
received).
U p d a t i n g f a i l 8 5
Turn on the power again. Update will
start automatically.
86
Data was found to be corrupt dur-
ing verication after the ash was
rewritten.
U p d a t i n g f a i l 8 6
Turn on the power again. Update will
start automatically.
A0
Failed to acquire the IP address
(AutoIP) before CX870 rewrite
(Application Mode).
C o n n e c t i o n F a i l A 0
Check the network connection. Update
in an environment where there is a
small network load.
A1
Failed to acquire the IP address
before CX870 rewrite (Application
Mode) (whern timed out).
C o n n e c t i o n F a i l A 1
Check the network connection. Update
in an environment where there is a
small network load.
A2
Unauthorized login DPMS access
notication was received when
rewriting the CX870 related rm-
ware (Application Mode).
L o g i n f a i l e d A 2
Check the network connection. Update
in an environment where there is a
small network load.
67

Denon AVR-S700W Specifications

General

Channels	7.2
Power Output per Channel	75 W (8 ohms, 20 Hz - 20 kHz, 0.08% THD)
Frequency Response	10 Hz - 100 kHz
Total Harmonic Distortion	0.08%
Signal-To-Noise Ratio	98 dB
Input Impedance	47 kOhms
Input Sensitivity	200 mV
HDMI Inputs	6
HDMI Outputs	1
Composite Inputs	2
Component Inputs	2
Analog Inputs	4
Composite Output	1
Component Output	1
Wi-Fi	Yes
Bluetooth	Yes
AirPlay	Yes
DLNA	Yes
HDMI Pass-Through	Yes
HDMI Switching	Yes
3D Technology	Yes
Digital Inputs	2 Optical
Supported Audio Formats	DTS-HD Master Audio, Dolby TrueHD
Supported Video Formats	4K, 3D
Additional Features	Audyssey MultEQ
Tuner Presets	56
Dimensions	17.1 x 13.3 x 6.6 inches