Error
Code
Details of Error code Display Coping strategies
A3
Notied that the access to the
DPMS is congested line, when
rewriting the CX870 system (Ap-
plication Mode).
S e r v e r i s b u s y A 3
Check the network connection. Update
in an environment where there is a
small network load.
A4
Notied that the access to the
DPMS connection is failed, when
rewriting the CX870 system (Ap-
plication Mode).
C o n n e c t i o n F a i l A 4
Check the network connection. Update
in an environment where there is a
small network load.
A6
Logged into DPMS and error was
received as rmware information,
when rewriting the CX870 system
(Application Mode).
U p d a t i n g f a i l A 6
Turn on the power again. Update will
start automatically.
Update in an environment where there
is a small network load.
A7
Logged into DPMS and requested
rmware data information but
a timeout occurred when when
rewriting the CX870 system (Ap-
plication Mode).
U p d a t i n g f a i l A 7
Turn on the power again. Update will
start automatically.
Update in an environment where there
is a small network load.
AE
Error notication was received
when downloading rmware for
rewriting the CX870 system (when
failed to download).
D o w n l o a d f a i l A E
Turn on the power again. Update will
start automatically.
Update in an environment where there
is a small network load.
AF
Error notication was received
when downloading rmware for
rewriting the CX870 system (Boot
Loader Mode) (line congestion).
D o w n l o a d f a i l A F
Turn on the power again. Update will
start automatically.
Update in an environment where there
is a small network load.
B0
Error notication was received
when downloading rmware for
rewriting the CX870 system (Boot
Loader Mode) (When a connec-
tion failed).
D o w n l o a d f a i l B 0
Turn on the power again. Update will
start automatically.
Update in an environment where there
is a small network load.
B1
Firmware downloding error no-
tication was received (Timeout
failure).
D o w n l o a d f a i l B 1
Turn on the power again. Update will
start automatically.
Update in an environment where there
is a small network load.
B2
Error notication was received
when rewriting the CX870 system
rmware.
D o w n l o a d f a i l B 2
Turn on the power again. Update will
start automatically.
Update in an environment where there
is a small network load.
B3
Notication is failed to rewriting
the rmware (Timeout failure).
U p d a t i n g f a i l B 3
Turn on the power again. Update will
start automatically.
Update in an environment where there
is a small network load.
B4
Failed to change the CX870 sys-
tem mode.
(Boot Loader Mode)
U p d a t i n g f a i l B 4
Initialize the unit and try updating
again.
B5
Failed to change the CX870 sys-
tem mode.
(Application Mode)
U p d a t i n g f a i l B 5
Initialize the unit and try updating
again.
68
To Next Page
Loading...
Need help?
General
