Denon AVR-X4000 User Manual

142
Appendix
TipsPlaybackConnections
Contents
Front panel Display Rear panel IndexRemote
Settings
2 Video
Setting items Description Page
Picture Adjust Adjusts the video quality.
161
Picture Mode Select the desired picture mode according to the video content and your viewing environment.
161
Contrast Adjust picture contrast.
161
Brightness Adjust picture brightness.
161
Saturation Adjust picture chroma level (color saturation).
161
Hue Adjust green and red balance. Also called Tint.
161
Noise Reduction Reduce overall video noise.
162
Enhancer Emphasize picture sharpness.
162
HDMI Setup Makes settings for HDMI video/audio output.
162
Auto Lip Sync Make automatic compensation for timing shift in audio and video output.
162
HDMI Audio Out Select HDMI audio output device.
163
Video Output Selects which HDMI outputs to use.
163
HDMI Pass Through Selects how the AV receiver will pass HDMI signals to the HDMI output in standby power mode.
163
HDMI Control You can link operations with devices connected to HDMI and compatible with HDMI Control.
163
Pass Through Source The AV receiver will “pass through” the sources HDMI signal when in standby.
164
Power O Control Links the power standby of this unit to external devices.
164
Component Video Out Sets whether to use the component video output connector for MAIN ZONE or ZONE2.
164
Setting items Description Page
Graphic EQ Uses the graphic equalizer to adjust the tone of each speaker.
160
Speaker Selection Select whether to adjust tones for individual speakers or for all speakers.
160
Adjust EQ Adjust tonal balance for each frequency band. Adjust the speaker selected in “Speaker Selection”.
160
Curve Copy Copy “Audyssey Flat”curve from MultEQ® XT32.
160

Denon AVR-X4000 Specifications

General

Receiver type	-
Frequency range	10 - 100000 Hz
Output impedance	16 Ω
Speaker selector	A+B
Input sensitivity	200 mV
Audio output channels	7.2 channels
Signal-to-Noise Ratio (SNR)	102 dB
Total Harmonic Distortion (THD)	0.008 %
Power output per channel (1KHz@6 Ohm)	165 W
Power output per channel (20-20KHz@8 Ohm)	125 W
HDMI in	7
AC (power) in	Yes
Composite video in	4
Ethernet LAN (RJ-45) ports	1
Component video (YPbPr/YCbCr) in	2
Number of HDMI outputs	3
Connectivity technology	Wired
Speakers connectivity type	Banana connector
Audio formats supported	AAC, FLAC, MP3, WAV, WMA
Image formats supported	JPG
Wi-Fi	No
RDS features	PTY, TP
FM band range	87.5 - 108 MHz
Supported radio bands	FM
Internet radio services supported	Spotify, vTuner
Supported video modes	1080i, 1080p, 480p, 576p, 720p
Display	VFL
Color depth	24 bit
Aspect ratio	4:3, 16:9
Product color	Silver
Audio decoders	Dolby Digital, Dolby Digital EX, Dolby Digital Plus, Dolby Pro Logic II, Dolby Pro Logic IIx, Dolby Pro Logic IIz, Dolby TrueHD, DTS-ES (Discrete 6.1), DTS-ES (Matrix 6.1), DTS-HD, DTS-HD Master Audio
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Apple docking compatibility	Not supported
AC input voltage	230 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.1 W
Power consumption (typical)	670 W

Weight and Dimensions

Depth	379 mm
Width	434 mm
Height	167 mm
Weight	12300 g