Denon AVR-X4000

193
Appendix
TipsPlaybackConnections
Contents
Front panel Display Rear panel IndexRemote
Settings
Language
Set the language for display on the menu screen.
English (Default) / Français / Español
%
•“Language” can also be set by the following procedure. However, the menu
screen is not displayed.
Following the display content to make the setting.
1. Press and hold the main unit’s
o p for at least 3 seconds.
“zVideo Format <NTSC>” appears on the display.
2. Press the main unit’s
i.
“zGUI Language <ENGLISH>” appears on the display.
3. Use the main unit’s
o p and set the language.
4. Press the main unit’s ENTER to complete the setting.
General
Make various other settings.
ZONE2 Setup / ZONE3 Setup
Set the audio to play back with multi-zone (ZONE2, ZONE3).
%
•The setting values (dB) for “Volume Limit” and “Power On Volume” are what is
displayed when “Scale” (vpage155) in the menu is set to “–79.5dB – 18.0dB”.
2 Bass
Adjust bass tones.
–14dB – +14dB (Default : 0dB)
2 Treble
Adjust treble tones.
–14dB – +14dB (Default : 0dB)
2 High Pass Filter
Make settings for cutting the low range to reduce distortion in the bass.
On : The low range is attenuated.
O (Default) : The low range is not attenuated.