Denon AVR-X4000

68
Appendix
TipsSettingsConnections
Contents
Front panel Display Rear panel IndexRemote
Playback
Selecting audio programs
HD Radio Technology enables stations to broadcast multiple Audio
Program and data services on HD2 / HD3 / HD4 channels.
1
Select the tuning mode (“HD-Auto”, “Auto” or
“Manual”).
2
Press TUNE + or TUNE – to tune in the desired Multicast
channel.
•If the station you are tuning in has multiple audio programs,“HD1”is
indicated on the display.
If it only has one audio program, “HD” is indicated.
•When the unit receives multicast channels, the multicast program
number (HD2) is displayed to the right of the station name.
NOTE
•This function is not available for AM HD Radio stations because they cannot
broadcast multicast channels.
•If digital audio data cannot be received after the station is selected, or if the station
signal is weak, the unit may not be able to receive the multicast channels.
•If the station signal is weak, the digital audio of the multicast channel may cut out.
Listening to preset stations
1
Use CH/PAGE df or 0 – 9 to select the desired preset
channel.