Denon AVR-X4000 User Manual

203
Appendix
TipsPlaybackConnections
Contents
Front panel Display Rear panel IndexRemote
Settings
Registering preset codes
There are two methods for registering preset codes; the simple method for
registering preset codes of Denon players, and the method for registering
the preset numbers of other manufacturers’ devices.
•Registering Denon Players (vpage203)
•Registering by entering preset numbers (vpage204)
2 Registering Denon Players
Use the following simple method to register the preset codes of Denon
Blu-ray Disc players, DVD players and CD players.
n Registering Blu-ray Disc Players
1
Press and hold down Blu-ray and OPTION until the
DEV, TV and AVR indicators on the remote are flashing
green, then release.
n Registering DVD Players
1
Press and hold down DVD and OPTION until the
DEV, TV and AVR indicators on the remote are flashing
green, then release.
n Registering CD Players
1
Press and hold down CD and OPTION until the DEV,
TV and AVR indicators on the remote are flashing green,
then release.
n Registering multiple players at the same time
1
Press and hold down FAVORITE STATION 1 – 4 and
OPTION until the DEV, TV and AVR indicators on the
remote are flashing green, then release.
Devices to be registered at the same time
Press and
hold down
the buttons
Bru-ray Disc
player
DVD player CD player
P P
FAVORITE
STATION 1
and
OPTION
P P
FAVORITE
STATION 2
and
OPTION
P P
FAVORITE
STATION 3
and
OPTION
P P P
FAVORITE
STATION 4
and
OPTION
NOTE
•Depending on the model and year of manufacture of your device, some buttons
may not operate. In this case, try “Registering by entering preset numbers”
(vpage204).

Denon AVR-X4000 Specifications

General

Receiver type	-
Frequency range	10 - 100000 Hz
Output impedance	16 Ω
Speaker selector	A+B
Input sensitivity	200 mV
Audio output channels	7.2 channels
Signal-to-Noise Ratio (SNR)	102 dB
Total Harmonic Distortion (THD)	0.008 %
Power output per channel (1KHz@6 Ohm)	165 W
Power output per channel (20-20KHz@8 Ohm)	125 W
HDMI in	7
AC (power) in	Yes
Composite video in	4
Ethernet LAN (RJ-45) ports	1
Component video (YPbPr/YCbCr) in	2
Number of HDMI outputs	3
Connectivity technology	Wired
Speakers connectivity type	Banana connector
Audio formats supported	AAC, FLAC, MP3, WAV, WMA
Image formats supported	JPG
Wi-Fi	No
RDS features	PTY, TP
FM band range	87.5 - 108 MHz
Supported radio bands	FM
Internet radio services supported	Spotify, vTuner
Supported video modes	1080i, 1080p, 480p, 576p, 720p
Display	VFL
Color depth	24 bit
Aspect ratio	4:3, 16:9
Product color	Silver
Audio decoders	Dolby Digital, Dolby Digital EX, Dolby Digital Plus, Dolby Pro Logic II, Dolby Pro Logic IIx, Dolby Pro Logic IIz, Dolby TrueHD, DTS-ES (Discrete 6.1), DTS-ES (Matrix 6.1), DTS-HD, DTS-HD Master Audio
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Apple docking compatibility	Not supported
AC input voltage	230 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.1 W
Power consumption (typical)	670 W

Weight and Dimensions

Depth	379 mm
Width	434 mm
Height	167 mm
Weight	12300 g