Denon AVR-X4000 User Manual

197
Appendix
TipsPlaybackConnections
Contents
Front panel Display Rear panel IndexRemote
Settings
Information
Show information about receiver settings, input signals, etc.
2 Audio
Show the audio information for MAIN ZONE.
Sound Mode : The currently set sound mode.
Input Signal : The input signal type.
Format : The number of input signal channels (presence of front,
surround, LFE).
Sample Rate : The input signal’s sampling frequency.
Oset : The dialogue normalization correction value.
Flag : This is displayed when inputting signals including a surround
back channel. “MATRIX” is displayed with Dolby Digital EX
and DTS-ES Matrix signals, “DISCRETE” with DTS-ES Discrete
signals.
Dialogue normalization function
This function is automatically activated when playing Dolby Digital,
Dolby Digital Plus, Dolby TrueHD, DTS and DTS-HD sources.
It automatically corrects the standard signal level for individual
program sources.
The correction value can be checked using the STATUS on the main
unit.
Dial.Norm
Offset - 4dB
The figure is the corrected value. This cannot be changed.
2 Video
Show the HDMI input/output signals and HDMI monitor information
for MAIN ZONE.
HDMI Signal Info.
Resolution / Color Space / Pixel Depth
HDMI Monitor 1 / HDMI Monitor 2
Interface / Resolutions
2 ZONE
Show information about current settings.
MAIN ZONE : This item shows information about settings for MAIN
ZONE. The information displayed diers according to
the input source.
ZONE2 : This item shows information about settings for ZONE2.
ZONE3 : This item shows information about settings for ZONE3.
2 Firmware
Version : Displays information for the current firmware.

Denon AVR-X4000 Specifications

General

Receiver type	-
Frequency range	10 - 100000 Hz
Output impedance	16 Ω
Speaker selector	A+B
Input sensitivity	200 mV
Audio output channels	7.2 channels
Signal-to-Noise Ratio (SNR)	102 dB
Total Harmonic Distortion (THD)	0.008 %
Power output per channel (1KHz@6 Ohm)	165 W
Power output per channel (20-20KHz@8 Ohm)	125 W
HDMI in	7
AC (power) in	Yes
Composite video in	4
Ethernet LAN (RJ-45) ports	1
Component video (YPbPr/YCbCr) in	2
Number of HDMI outputs	3
Connectivity technology	Wired
Speakers connectivity type	Banana connector
Audio formats supported	AAC, FLAC, MP3, WAV, WMA
Image formats supported	JPG
Wi-Fi	No
RDS features	PTY, TP
FM band range	87.5 - 108 MHz
Supported radio bands	FM
Internet radio services supported	Spotify, vTuner
Supported video modes	1080i, 1080p, 480p, 576p, 720p
Display	VFL
Color depth	24 bit
Aspect ratio	4:3, 16:9
Product color	Silver
Audio decoders	Dolby Digital, Dolby Digital EX, Dolby Digital Plus, Dolby Pro Logic II, Dolby Pro Logic IIx, Dolby Pro Logic IIz, Dolby TrueHD, DTS-ES (Discrete 6.1), DTS-ES (Matrix 6.1), DTS-HD, DTS-HD Master Audio
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Apple docking compatibility	Not supported
AC input voltage	230 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.1 W
Power consumption (typical)	670 W

Weight and Dimensions

Depth	379 mm
Width	434 mm
Height	167 mm
Weight	12300 g