12
ENGliSh
Button located on both the main unit and the remote control
BUTTON
Button only on the main unit
<BUTTON>
Button only on the remote control
[BUTTON]
Symbols used to indicate buttons in this manual
Listening to Napster
Napster is not available in all countries.
1
Prepare for playback.
q Check the network environment, then turn on this unit’s
power (vpage8 “Turning the power on”).
w If settings are required, make the “Setting the network
[Network]” (vpage21).
2
Press [ONLINE MUSIC] to switch the input source
to “Napster”.
•For details on selecting the input source using the unit buttons, see
“Selecting the input source using unit operations” (vpage8).
3
Use ui p to input “Username” and “Password”.
•For character input, see page 31.
4
After inputting the “Username” and “Password”,
select “login”, then press [ENTER] or
<1/3
ENTER
>.
If the “Username” and “Password” match, the top menu for
Napster is displayed.
NOTE
•The password should be no longer than 99 characters.
•Press [HOME] to cancel the input.
n Searching from Napster menu
1
Use ui to select search item or folder, then press
[ENTER], <1/3
ENTER
> or p.
2
Repeat step 1 until the track is displayed.
3
Use ui to select the track item, then press [ENTER],
<1/3
ENTER
> or p.
n Entering a character search for the track you
want to listen to
1
Press [SEARCH].
•You can search by artist name, album name or track name in menu
list.
•You cannot perform search on the playback screen.
2
Use ui to select the search item, then press
[ENTER] or <1/3
ENTER
>.
The search display appears.
3
Input the characters, then press [ENTER] or
<1/3
ENTER
>.
n Registering tracks in my Napster library
1
Press p while the track you wish to register is
playing.
“Add to my library?” appears.
2
Press [ENTER], <1/3
ENTER
> or p.
The track is entered in the Library.
When you press o, the registration is cancelled and the display
returns to the previous page.
Listening to tracks registered in my Napster library
1
Use ui to select “My Napster Library”, then press
[ENTER], <1/3
ENTER
> or p.
2
Use ui to select the information or track, then
press [ENTER] or<1/3
ENTER
>.
Network audio playback
[ENTER]
[ONLINE MUSIC]
[MENU]
[SEARCH]
[HOME]
[MODE]
[TUNING df]
[DISPLAY]
[REPEAT]
[RANDOM]
[2]
[1/3]
[TUNER]
uio p
[8 9]
uio
p
<1/3 ENTER><SOURCE>
1.DNP720AEE2_ENG_Final_0727.indd 12 2011/07/30 8:39:07