Denon DNP-720AE - Setting the Network [Network]; Friendly Name Edit; Zone Management Function

20
ENGliSh
Advanced operations
Menu map
Setting items Detailed items Description Page
Network
Network First Setup
[Network] 1/9
:enter :return
Network First Setup
Performs the network settings using a Wizard style window.
For details on the operations, see the separate “Network setup guide”.
–
Connection
Performs the settings for a wired or wireless LAN. 21
(Wired)
Performs the settings for a wired LAN. 21
DHCP (On) or DHCP (Off) Performs the DHCP setting. 21
IP Address
z1
Performs the IP address setting. 21
Subnet Mask
z1
Performs the subnet mask setting. 21
Gateway
z1
Performs the gateway setting. 21
Primary DNS
z1
Performs the primary DNS setting. 21
Secondary DNS
z1
Performs the secondary DNS setting. 21
Proxy Performs the proxy setting. 22
Connection Performs the wired LAN connection. 21
(Wireless)
Performs the wireless LAN connection setting. 22
Search Access Point Selects and sets the wireless connections from the access point list. 22
WPS Sets the wireless connection using WPS. 23
Manual Setting Sets the wireless connection manually. 23
Last.fm Account Performs the Last.fm account setting again. 11
Napster Account Performs the Napster account setting again. 12
Last.fm Display Disables the display of Last.fm on the menu. 23
Party Mode
Performs the party mode function settings. 24
Start Party
Party mode starts.
24
Stop Party
z2
Party mode stops.
24
Party Mode Function
Enable/disable the party mode function.
24
Other Network
Performs other network settings. 25
Network Standby Performs the ON/OFF settings for the network function when in standby mode. 25
PC Language Selects the language to be used for displaying the Internet sites. 26
Friendly Name Edit Edits a name displayed on the Internet. 26
Zone Management Display and control a maximum of 10 devices that are connected to the same network. 26
Update Notification Set the Update notification on/off. 27
Upgrade Notification Set the Upgrade notification on/off. 27
Network Info Displays various information about the network. –
Other
Auto Standby
[Other] 1/5
:enter :return
Auto Standby Sets the unit power to standby when the unit is not in use. 27
Firmware Update Updates the firmware. 28
Add New Feature Displays new functions that can be downloaded, and upgrades functions. 28
Language Sets the language. 29
z1 Displayed when the “DHCP” setting (vpage21) is “Off”.
z2 Displayed when “Party Mode” is performed.
1.DNP720AEE2_ENG_Final_0727.indd 20 2011/07/30 8:39:14